Mitsubishi Motors' EV-based plug-in hybrid system

New Frontier

A pioneer in electro-mobility since 1966 and the first major manufacturer to launch a series production electric car (i-MiEV in 2009), Mitsubishi Motors is committed to explore the new frontiers that will allow electric vehicles (EVs) to venture beyond urban areas.

This far-reaching outlook includes long-term R&D of new battery technologies (in line with METI's Road Map for Next Generation Vehicle Strategy*) and electronics, innovative powertrains (such as in-wheel motors**) or long- haul / ultra-low impact vehicles whose first manifestation will be the Outlander EV-based plug-in hybrid (P-HEV), to be launched during the course of FY2012.

*see page 3 of: http://www.meti.go.jp/english/press/data/pdf/N-G-V2.pdf
** http://www.mitsubishi-motors.com/en/corporate/pressrelease/corporate/detail1321.html

First

All these promising proprietary developments are not meant as showcases. Instead, they should be viable propositions in the marketplace where they would fulfill real-life needs and expectations of customers around the world and at the same time, blend with other Mitsubishi Motors technologies to result in uniquely MMC products.

In that sense, the forthcoming Outlander P-HEV will be a milestone vehicle:

• Mitsubishi Motors' first P-HEV car, it will be an EV-based vehicle, relying on MMC's extensive EV and electronic know-how, supplemented by a petrol engine when needed.
• Making the best use of Mitsubishi's renown extensive 4-Wheel-Drive expertise, it will also be the first permanent 4WD electric car in series production.
• The unique drivetrain combination of front electric motor + rear electric motor + front traction/generator petrol engine will translate into a choice of three driving modes:
  • Pure (Twin Motor 4WD EV)
  • Series (Twin Motor 4WD EV supported by ICE* generator)
  • Parallel (Twin Motor 4WD EV supplemented by ICE*-powered FWD).
• Taking advantage of the possibilities of Outlander's versatile architecture, it will be the first built-in P-HEV, designed and built alongside the more conventional ICE* versions of the same vehicle - a first in the market.
• his engineering integrity also means it was not be a later P-HEV adaptation of an existing ICE*-powered vehicle but instead, was envisaged from the start of the design of Outlander's platform and electronic architecture.

EV-based + multi-mode + twin-motor + plug-in hybrid + permanent 4WD (+ crossover)…

MMC's EV-based plug-in hybrid system uses high-capacity traction batteries that allow the vehicle to cover over 50 km in 4WD electric mode alone, allowing it to be driven solely as an EV for most everyday situations. Furthermore and amongst others:

• Depending on power consumption and remaining battery charge, the system will start the petrol engine automatically as a generator ("Series Mode").
• At higher vehicle speeds (within legal speed limits), the petrol engine, with its better high-end energy efficiency, will supply supplementary drive torque to assist the front and rear motors ("Parallel Mode").
• In addition, with the push of a button, the driver has the freedom to select a "Battery Drive Mode" when she/he wishes to drive quietly and emissions-free (at sufficient battery levels) in residential areas or the countryside using pure EV power.
• At the same time, the driver can also switch to a "Battery Charge Mode" while on the move, controlling use of battery power and using the engine as a generator to charge the batteries.
• When the driver applies the brakes, the front and rear motors act as generators recovering kinetic energy and using it to charge the traction battery.
• Mitsubishi Motors' P-HEV system uses a newly developed twin-motor four-wheel-drive system mated to Mitsubishi's S-AWC (Super-All Wheel Control). Based on the four-wheel-drive technology developed and honed in the Lancer Evolution, S-AWC it integrates control of the 4WD, ASC and ABS systems. Working in tandem with the Mitsubishi plug-in hybrid EV system, S-AWC also contributes to better fuel efficiency.
• The two motors drive the front and rear axles independently. Being virtually lag-free and offering superior control, the motors ensure finer more precise control of the 4WD system. The Twin Motor 4WD system does away with the propeller shaft, hydraulic system and clutch plate used to connect the front and rear axles in conventional 4WD systems.
• In addition to the obvious active safety of such a sophisticated 4WD drivetrain, the Mitsubishi P-HEV system gives the 100% instant off-the-line torque inherent to electric motors - with acceleration comparable to that of a 3.0-liter V6 engine - while its twin electric motor will guarantee the smooth progression required in difficult wintery driving conditions.

*"ICE": Internal Combustion Engine

When fitted to the all-new Outlander, the Mitsubishi plug-in hybrid EV system (fitted with a petrol engine) will allow for a range and very low emissions similar to that of the Concept PX-MiEV II show car, i.e. a driving distance of over 800 km and a CO2 target below 50 g/km.

(All data subject to final homologation)